The power4you system consists of 4 components

Electricity and heat generated at home from a single device, stored and used by the homeowner when needed.

  1. Gas connection
  2. Combined heat and power plant
  3. Battery storage
  4. Storage tank for heating water and domestic hot water

First of all:

A primary energy is always needed to be able to convert it into another energy!
For true and environmentally friendly self-sufficiency, you should run an old-fashioned mill. Unfortunately, this desire is not achievable for most homeowners. In addition, energy demand is constantly increasing and energy costs are becoming more expensive every year.
That’s where we come in…

Re 1: Gas connection

The public gas network is well developed in cities and supplies you with natural gas or biogas directly into the building. The connection to the CHP is simply technically done, just like with a gas boiler. Call your local heating engineer.

If you are not connected to the gas grid, you can simply install a gas tank. The supplier will even lay a pipe to your house. Buying or renting is up to you.

A gas connection is easy and therefore available everywhere.

Re 2: Combined heat and power plant

As the main component of the power4you system, we have developed and manufactured our own cogeneration plant. It differs significantly from all other existing CHP units. It only produces energy that you need and consume yourself in your property. This is a real stand-alone solution.

Our CHP weighs about 80 kg empty and is delivered directly to your home. It is built to save space and is the size of a low refrigerator. All relevant connections are easily connected by local craftsmen.

Re 3: Battery storage

In our power4you system, the battery storage unit is used to store unused electricity or to create a reserve for later use. We can also supply you with the battery storage system and frequency converter from a single source.

Re 4: Storage tank for heating water and domestic hot water

All the heat generated in our CHP unit is fed into the water storage tank. In a stratified water storage tank, heated heating water and domestic hot water can be stored at the same time.

The system works unobtrusively in the background, is quiet and constantly replenishes the storage. You can’t become a better energy manager any easier.

Ready !

With these components you have now
created your own power4you system.

Now you generate all the energy you need to supply your property independently.

Block of flats BHKW
  • 100 per cent
  • free from the energy producer
  • own energy company
  • Independent of the public grid
  • You now produce energy yourself more cheaply and efficiently
  • save cash
  • have invested in your property
  • Have created your island
  • You are spared from the blackout
  • The outside world cannot control or even influence you
  • They do not burden anyone and support green energy supply
  • More freedom
  • Up to date and open or compatible with other environmentally friendly technology, such as solar and hydrogen for the future.
  • *** The traffic light is green with our novel energy concept on your own island ***

By the way: Maintenance or repair costs - no thanks!

Incidentally, our power4you block-type thermal power station is also maintenance-free.

Our CHP is designed in such a way that it only needs fresh oil once a year. You know this from your car! After all, it’s the same technology. That’s why we mainly use proven components from automotive technology in our CHP unit.

Our own modern control system meets all requirements. This allows us to keep an eye on all CHPs outside. So we can see whether your CHP unit is running well at home. Should a defect occur, we simply replace the heart in the event of a warranty claim!

So with us, no technician comes, but the shipping company and delivers a „new“ device. You know this from coffee machines, the exchange takes place within 24 hours.

Don’t worry, even then you are still safe at home, because in such a case you can draw electricity from the public grid to continue maintaining your storage.

In any case, you save maintenance costs and disproportionate repairs.

All systems are easy to connect through plug and play connections.

With other CHP manufacturers, you pay high maintenance costs annually. About 600 € per year, which quickly adds up to 6000 € in 10 years!

We don’t even want to talk about the dizzying repair costs of complex CHP units and complicated electronics of other manufacturers.

Replace the oil can once a year

The heart of our newly developed combined heat and power unit is mainly made of serial parts from the automotive industry. Tried and tested components will have a long service life. Our CHP unit is neither maintained nor repaired by specially trained service technicians. Through our modern control system and connection to the internet, we will observe your CHP in operation. If it should show a defect, we will simply replace it, within 24 hours. You know this from today’s coffee machines in the office, by forwarding. Since it is light, it is easy to transport and the connections are also easy to replace or connect. You don’t have to be an expert to do this.

Changing the oil is also not complicated, as a full canister is available for the current operation of the CHP unit. The CHP unit automatically fetches the oil it needs from the full container.

After one year, the oil will be sealed and should be replaced. Then you will insert a new oil canister, quite simply.

That’s all it takes. My grandma can do it herself.